The form and frequency of the amide I band, assigned to the C=O stretching vibration within peptide bonds, is informative and predictive of peptide or protein secondary structure. Fourier-transform infrared (FT-IR) spectroscopy analysis of protein secondary (2°) structure is particularly useful in peptide, protein, or enzyme formulation, widespread in the pharmaceutical and biofuel production industries.
The form and frequency of the amide I band, assigned to the C=O stretching vibration within peptide bonds, is informative and predictive of peptide or protein secondary structure. Fourier-transform infrared (FT-IR) spectroscopy analysis of protein secondary (2°) structure is particularly useful in peptide, protein, or enzyme formulation, widespread in the pharmaceutical and biofuel production industries.
Bruker's Confocheck FT-IR dedicated protein analysis system is used to study protein 2° structure (predict α-helix, β-sheet, and random coil content and changes therein) and protein stability (altered 2° structure in response to stress, i.e., high ionic conditions, pH change, or temperature change) in solution. The 2° structure of a protein is derived by comparing the shape and position of the amide I band of the protein with the shape and position of the amide I band of proteins with known 2° structures derived from X-ray or nuclear magnetic resonance studies. Figure 1a shows the FT-IR absorbance spectra of two proteins, hemoglobin and concanavalin A, that differ greatly in 2° structure. The 2° structure of most proteins is between these two extremes, and the amide I band shape (encircled) would take an intermediate form. So, in practice, there are significant but relatively small differences in the amide I band between proteins. On the basis of these spectral differences, the 2° structure of virtually any protein (example: protein D, Figure 1a) is determined by chemometric methods (e.g. Partial Least Squares).
Figure 1: (a) FT-IR spectra and 2° structure values. (b) Graph of temperature induced structural changes derived from FT-IR spectra.
Subsequent to peptide or protein 2° structure determination, the Confocheck system performs highly sensitive analysis of 2° structure changes that provide a measure of protein stability and aggregation. Generally, peptides and proteins unfold or denature when incubated at higher temperatures. Therefore, rising temperatures can be used to accelerate the denaturation process induced by other effects such as point mutations or formulation changes. Typically in the Confocheck system, the denaturation process is induced by step-wise increases in temperature concurrent with spectrum acquisition. Over the course of temperature rise and peptide/protein denaturation spectra are acquired. The change in shape of the amide I band during the heating process is indicative of loss of α-helices and intramolecular β-sheets and concurrent peptide/protein aggregation due to intermolecular β-sheet formation (Figure 1b). The method is very sensitive, able to identify structural changes of a few percentage points.
The successful analysis of proteins in solution by FT-IR requires a robust system that provides sensitive and reproducible measurements of proteins in solution and the requisite chemometric tools. The Confocheck system satisfies these requirements, thus, enabling the routine use of FT-IR for protein structure and stability analyses for a number of applications. FT-IR analysis of peptide/proteins is used during formulation optimization (example, antibody based therapeutic formulation), thus, expediting the process. Also, peptides/proteins that are expressed in bacterial cells form inclusion bodies with unique 2° structure characteristics (example: enzymes used in the generation of biofuels). FT-IR analysis of inclusion body proteins is used to monitor the protein solubilization and renaturation process.
Bruker Optics
Billerica, MA
1-888-4BRUKER
Testing Solutions for Metals and PFAS in Water
January 22nd 2025When it comes to water analysis, it can be challenging for labs to keep up with ever-changing testing regulations while also executing time-efficient, accurate, and risk-mitigating workflows. To ensure the safety of our water, there are a host of national and international regulators such as the US Environmental Protection Agency (EPA), World Health Organization (WHO), and the European Union (EU) that demand stringent testing methods for drinking water and wastewater. Those methods often call for fast implementation and lengthy processes, as well as high sensitivity and reliable instrumentation. This paper explains how your ICP-MS, ICP-OES, and LC-MS-MS workflows can be optimized for compliance with the latest requirements for water testing set by regulations like US EPA methods 200.8, 6010, 6020, and 537.1, along with ISO 17294-2. It will discuss the challenges faced by regulatory labs to meet requirements and present field-proven tips and tricks for simplified implementation and maximized uptime.
Practical Autodilution for ICP-MS and ICP-OES
January 20th 2025Gain insights into improving efficiency and accuracy in elemental analysis through automated dilution technology. Learn about the key capabilities of the Agilent ADS 2 system and its seamless integration with ICP-MS and ICP-OES workflows.
UV-Vis Spectroscopy: Exporting Your Measurement Out of the Instrument
January 20th 2025Optical fibers in ultraviolet-visible (UV-Vis) spectroscopy can enable measurements outside the traditional sample compartment. This paper details the components needed for fiber optic systems, such as couplers and probes, and reviews the performance of Agilent's Cary series instruments. It is crucial to choose the right fiber optic setup for a specific lab’s needs to ensure accurate and efficient measurements.